產品中心
聯系我們
深圳市金福翔五金制品有限公司   
公司總機:0755-29376869  
                    0755-82595119
市場部直線:0755-29376869-108
客服部直線:0755-29376869-102
傳    真:0755-82597252  
郵    編:518109   
郵    箱:info@kingfeal.com   
地    址:深圳市龍華區大浪華霆路
                228號

產品中心

當前位置: 首頁 > 產品展示  > PEM壓鉚螺釘


產品名稱:PEM壓鉚螺釘

產品名稱:PEM壓鉚螺釘、壓鉚螺絲

產品型號:FH, FHS, FHA, TFH, TFHS, HFH, HFHS, HFHB, TPS、FH4...

產品特點:裝入圓形孔內,采用沖壓鉚接,能使其頭部緊密鉚接在厚度為0.5以上的薄板中。

螺紋規格:#2到#3/8;M3到M10。

Concealed Head - Types CFHA, CFHC, CHA, CHC

concealed_headPEM self-clinching concealed-head studs install permanently in steel or aluminum sheets as this as .062" / 1.6mm to provide strong and reusable threads for mating hardware in a wide range of thin-metal assembly applications.

PDF Download Bulletin CH

Flush-Head - Types FH, FH4, FHA, FHP, FHS

flush_head_studsAvailable in steel, aluminum and stainless steel, PEM standard flush-head studs are designed to be installed in sheets as thin as .040" / 1 mm. 

PDF Download Bulletin FH

Flush-Head, Low Displacement - Types FHL, FHLS

flush_head_low_displacementFlush, low-displacement head studs install closer to the edge of a sheet than PEM Types FH/FHS studs without causing that edge to bulge.

PDF Download Bulletin FH
Heavy Duty, Non Flush - Types HFH, HFHB, HFE, HFHS

heavy_dutyHeavy Duty studs are designed with an enlarged head diameter which projects above the sheet metal and provides maximum pull through in sheets as thin as .040" / 1mm

PDF Download Bulletin FH

High Tensile Strength, Non Flush - Types HF109, HFG8

high tensile strength studs Heavy duty high tensile strength studs are manufactured for the most demanding applications from medium carbon alloy steel, then heat-treated to high strength and hardness qualities.

PDF Download Bulletin FH

Thin Sheet, Non Flush - Types TFH, TFHS
thin sheet studsThin sheet studs are for sheets as thin as .020 inches / 0.51 mm. They may also be used in thicker sheets where flush head studs are not required. TFH studs are installed in the sheets in the same manner as flush-head studs; however different punches and anvils are required.

PDF Download Bulletin FH

Unthreaded, Flush - Types TP4, TPS, TPXS

unthreaded pinsFlush-head pilot pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy.

PDF Download Bulletin FH

Installs Into Stainless - Types FH4, FHP, TP4

flush head studsOne of the very basics of self-clinching is that the fastener must always be harder than the host sheet to ensure proper and permanent installation. Threaded types FH4, FHP and unthreaded type TP4 are specifically designed for installation into stainless steel sheets as thin as .040'" / 1 mm.


PDF Download Bulletin FH

Micro, Self-Clinching - Type MPP?

MPPType MPP, self-clinching micro pins are ideal for today's compact electronic assemblies. They can be installed into a variety of sheet materials up to HRB 92 / HB 195 in hardness and they offer excellent corrosion resistance.


PDF Download Bulletin MPP

深圳市金福翔五金制品有限公司© 2010   電話:0755-82595119  傳真:0755- 82597252  
郵箱:info@kingfeal.com  粵ICP備11036736號  技術支持:蒸蒸科技
{转码词},{转码词1},{转码词2},{转码词3} <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>